Stop your 3PL from picking Shopify orders before edits finish
How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.
Revize is a Shopify app for post-checkout order editing. This guide is for stores that ship through a 3PL, a warehouse management system (WMS) or an ERP, and need the warehouse to pick only the final version of each order.
Short answer: keep the order away from your warehouse until editing ends. Revize does this in one of three ways: a Shopify fulfillment hold (Hold orders), a release tag your 3PL waits for (Add release tag), or manual payment capture so the order stays unpaid until editing closes (Capture payment when editing closes). Then let your warehouse close editing early with a stop tag when picking starts.
Why 3PLs pick edited orders too early
Most 3PL and WMS connectors import a Shopify order within minutes of checkout. If a customer changes the size, address or items after the import, the warehouse still has the old version. The fix is timing: the warehouse should only see the order once the customer can no longer change it.Revize controls that timing with three settings that work together:
What blocks the warehouse until then: a hold, a release tag, or unpaid status.
How the warehouse can end editing early: a stop tag or a Shopify Flow action.
Step 1: choose when editing ends
In the Revize app, open Order Editing → Editing policy → Edit deadline.
Edit deadline
Best for warehouses that…
A fixed window (15, 30 or 60 minutes) or a custom duration
pick continuously and need a short, predictable delay
Scheduled cutoff (Pro)
pick in waves at set times, so every wave starts with a stable list
Until fulfillment
can absorb changes during picking, or close editing themselves with a stop tag
Until fulfillment does not hold the order. With this deadline, Revize doesn’t place a fulfillment hold and doesn’t add a release tag, so your 3PL can import the order straight away. If you need a hold while the order stays editable, use a rule with the Hold fulfillment action instead (rules engine, Pro), or close editing with a stop tag when picking starts.
Step 2: choose how the warehouse waits
Open Order Editing → Editing policy → Fulfillment while editing.
Hold orders (recommended)
Skip hold + release tag
Manual payment capture
Revize places a Shopify fulfillment hold when the order is created and lifts it when editing closes. Any 3PL or WMS that respects Shopify fulfillment holds waits automatically.
Works with most connectors and needs no setup on the 3PL side.
When the hold lifts, the warehouse gets the final, edited order.
Orders are not held. Turn on Add release tag and Revize tags the order revize:order_released when editing closes. Set your 3PL to import only orders with that tag.
Use Custom release tag (optional) if your 3PL already waits for a tag such as ready_to_ship. It can’t start with revize:.
Without a release tag, a 3PL can pick orders before customers finish editing. Skip hold is only safe when your 3PL filters by tag.
For connectors that ignore holds but only import Paid orders (Mintsoft’s default, for example). Set payment capture to Manual in Shopify, then turn on Capture payment when editing closes. Payment stays authorized while the customer can edit, and Revize captures it once editing ends, so the order becomes Paid and your connector imports it.
Available on every plan.
Revize won’t capture an order while it carries one of your Don’t capture orders with these tags tags.
If a capture fails, Try again if a capture fails retries and Revize emails you when it gives up.
If you also hold orders or use a release tag, the order is released only once it’s paid.
Revize never releases an order while the customer still owes money for an edit. If a customer adds items and doesn’t pay, the order stays held until it’s paid, or until Reverse unpaid edits (Pro) rolls the unpaid change back.
Hold only some orders
On Pro, the rules engine can hold fulfillment per order. Add a rule, match the orders (for example order tag pre-order, a shipping method, or a destination), and turn on the Hold fulfillment action. The hold is released when that rule’s deadline passes. Hold fulfillment can’t be combined with Disable editing or with the Until fulfilled deadline.To keep orders that Shopify flags as risky on hold for review, turn on Keep risky orders on hold under Fulfillment while editing.
Step 3: let the warehouse close editing early
Picking often starts before the edit window ends. Close editing the moment that happens:
1
Have the WMS or Shopify Flow tag the order
When an order enters picking, add a tag such as picked or wms:processing. Most WMS connectors can write a tag back to Shopify; Shopify Flow can too.
2
Add the same tag in Revize
In Revize, go to Settings → Order editing → Editing restrictions → Order tags and add the tag. Tag matching ignores letter case, but the spelling must match.
3
Editing closes immediately
As soon as the tag lands, the customer can’t edit the order any more, even if the edit window hasn’t run out. See Order edit restrictions.
If your workflow already runs in Shopify Flow, the Revize action Close editing now does the same thing without a tag. See Shopify Flow.
Match the release to your pick schedule
Setup
What the warehouse sees
Hold orders + fixed window
The hold lifts when the window ends. The most common setup.
Hold orders + Scheduled cutoff
Orders release at your cutoff times, so each pick wave starts with final orders.
Skip hold + Add release tag
Orders flow normally; the 3PL imports only tagged orders.
Any setup + stop tag
Editing also closes the moment picking starts.
Some connectors also have their own delay, such as ShipStation’s minimum order age or Mintsoft’s import delay. Setting that delay to your edit window length is a simple backup. See the ShipStation and Mintsoft answers.
If the 3PL already picked the order
Once an order is fulfilled in Shopify, editing ends and the customer no longer sees the edit options.
Once Revize has released an order to fulfillment, it stays closed. The Shopify Flow action Reopen editing skips orders that were already released, fulfilled or partially fulfilled, so a late workflow can’t reopen an order the warehouse is working on.
If a change reached the warehouse after it imported the order (for example on Skip hold without a release tag), your 3PL still has the old version. Re-sync or update the order in the 3PL, and switch to Hold orders, a release tag or a stop tag so it doesn’t happen again.
Rollout checklist
1
Check what your connector respects
Ask your 3PL or check its Shopify connector: does it wait for Shopify fulfillment holds, filter by tag, or import only paid orders? That decides between Hold orders, a release tag and payment capture.
2
Set the edit deadline
Match it to how soon picking starts. Use Scheduled cutoff for wave picking.
3
Choose Fulfillment while editing
Hold orders, or Skip hold with Add release tag, and Capture payment when editing closes if your connector imports only paid orders.
4
Add a stop tag
Have the WMS or Flow tag orders when picking starts, and add that tag under Editing restrictions → Order tags.
5
Test before customers see it
Turn on Test mode, place a test order as a tagged test customer, edit it, and confirm the warehouse imports the edited version only after editing closes.
Not sure which method fits your 3PL? Revize works with 100+ 3PLs, WMS and ERPs, and the team configures the setup with you. See Tech stack or book a setup call.
Frequently asked questions
Does Revize work with my 3PL if it ignores Shopify holds?
Yes. Use Skip hold with a release tag if your 3PL can filter by tag, or manual payment capture with Capture payment when editing closes if it imports only paid orders.
Does Until fulfillment hold my orders?
No. Until fulfillment keeps editing open until the order is fulfilled and doesn’t hold it or add a release tag. Use a rule with Hold fulfillment (Pro) or a stop tag if your warehouse must wait.
What tag does Revize add when editing closes?
revize:order_released, when Add release tag is on. You can replace it with your own tag in Custom release tag (optional).
Can my WMS stop customers editing once picking starts?
Yes. Have it add a tag when picking starts and add that tag under Settings → Order editing → Editing restrictions → Order tags. Editing closes immediately.
Will an unpaid edit ship?
No. Revize doesn’t release an order while the customer still owes money for an edit.
{"docsConfig":{"theme":"mint","$schema":"https://mintlify.com/docs.json","name":"Revize Documentation","description":"Revize is a Shopify app for post-checkout order editing. Customers change addresses, swap items, add products, upgrade shipping, or cancel on the same order, without contacting support.","colors":{"primary":"#6366F1","light":"#8B5CF6","dark":"#4F46E5"},"logo":{"light":"https://mintcdn.com/revize/_Q-lg5jPpdIW5Dem/logo/revize-logo-dark.png?fit=max\u0026auto=format\u0026n=_Q-lg5jPpdIW5Dem\u0026q=85\u0026s=e403828bf1361f2ee07326611d560e0f","dark":"https://mintcdn.com/revize/_Q-lg5jPpdIW5Dem/logo/revize-logo-light.png?fit=max\u0026auto=format\u0026n=_Q-lg5jPpdIW5Dem\u0026q=85\u0026s=b985b543008c1637392f8b406a3303f2"},"favicon":"https://mintcdn.com/revize/_Q-lg5jPpdIW5Dem/favicon.png?fit=max\u0026auto=format\u0026n=_Q-lg5jPpdIW5Dem\u0026q=85\u0026s=cee1b2285b0ba554c258012116b8747f","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Book Demo"}],"primary":{"type":"button","label":"Install Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"footer":{"socials":{"x":"https://x.com/revizenow","linkedin":"https://linkedin.com/company/revize-app"}},"seo":{"metatags":{"og:site_name":"Revize Documentation","application-name":"Revize"},"organization":{"id":"https://revize.app/#organization","name":"Revize","legalName":"Untechnickle","url":"https://revize.app","logo":"https://docs.revize.app/logo/revize-logo-dark.png","sameAs":["https://apps.shopify.com/revize","https://revize.app","https://www.untechnickle.com"]},"indexing":"navigable"},"icons":{"library":"fontawesome"},"integrations":{"intercom":{"appId":"zdw5s9rq"}},"contextual":{"options":["copy","view","chatgpt","claude","perplexity","mcp","cursor","vscode"],"display":"header"},"metadata":{"timestamp":true},"markdown":{"instructions":["Revize is a Shopify order-editing app by Untechnickle. Customers edit the same order after checkout on the Shopify order status page, inside a merchant-controlled window, before fulfillment.","Canonical docs: https://docs.revize.app. App listing: https://apps.shopify.com/revize. Public cancellation API: https://docs.revize.app/features/cancellation-api.","Do not confuse the How to Test Revize draft-order walkthrough with Test Mode, which hides the portal from untagged customers."]},"styling":{"latex":true},"navigation":{"global":{"anchors":[{"anchor":"Install Revize","icon":"cart-plus","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"},{"anchor":"Book Demo","icon":"calendar-days","href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true"}]},"languages":[{"language":"en","default":true,"href":""},{"language":"es","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Reservar demo"}],"primary":{"type":"button","label":"Instalar Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"es"},{"language":"fr","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Réserver une démo"}],"primary":{"type":"button","label":"Installer Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"fr"},{"language":"de","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Demo buchen"}],"primary":{"type":"button","label":"Revize installieren","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"de"},{"language":"pt","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Agendar demo"}],"primary":{"type":"button","label":"Instalar Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"pt"},{"language":"it","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Prenota una demo"}],"primary":{"type":"button","label":"Installa Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"it"},{"language":"ja","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"デモを予約"}],"primary":{"type":"button","label":"Revize をインストール","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"href":"ja"}]}},"deployment":{"deploymentMetadataValue":{"subdomain":"revize","hasAudioNarration":false,"actualSubdomain":"revize","customDomains":["docs.revize.app"],"gitSource":{"type":"github","owner":"untech-panda","repo":"docs","deployBranch":"main","contentDirectory":"","isPrivate":true,"mountPath":"","label":""},"entitlements":{},"buildId":"6b02b4965ed0b3845e78eb01","clientVersion":"0.0.4270","searchFilterCounts":[{"language":"en","tag":"Documentation","count":36},{"language":"de","tag":"Dokumentation","count":36},{"language":"es","tag":"Documentación","count":36},{"language":"fr","tag":"Documentation","count":36},{"language":"it","tag":"Documentazione","count":36},{"language":"ja","tag":"ドキュメント","count":36},{"language":"pt","tag":"Documentação","count":36},{"language":"en","tag":"Features","count":14},{"language":"en","tag":"Core Setup","count":14},{"language":"de","tag":"Funktionen","count":14},{"language":"de","tag":"Setup","count":14},{"language":"es","tag":"Funcionalidades","count":14},{"language":"es","tag":"Configuración básica","count":14},{"language":"fr","tag":"Fonctionnalités","count":14},{"language":"fr","tag":"Configuration","count":14},{"language":"it","tag":"Funzionalità","count":14},{"language":"it","tag":"Setup di base","count":14},{"language":"ja","tag":"機能","count":14},{"language":"ja","tag":"基本設定","count":14},{"language":"pt","tag":"Recursos","count":14},{"language":"pt","tag":"Configuração principal","count":14},{"language":"en","tag":"Support","count":5},{"language":"en","tag":"Help \u0026 FAQ","count":5},{"language":"de","tag":"Support","count":5},{"language":"de","tag":"Hilfe \u0026 FAQ","count":5},{"language":"es","tag":"Soporte","count":5},{"language":"es","tag":"Ayuda y FAQ","count":5},{"language":"fr","tag":"Support","count":5},{"language":"fr","tag":"Aide \u0026 FAQ","count":5},{"language":"it","tag":"Supporto","count":5},{"language":"it","tag":"Aiuto e FAQ","count":5},{"language":"ja","tag":"サポート","count":5},{"language":"ja","tag":"ヘルプと FAQ","count":5},{"language":"pt","tag":"Suporte","count":5},{"language":"pt","tag":"Ajuda e FAQ","count":5},{"language":"en","tag":"Guides","count":3},{"language":"en","tag":"Getting Started","count":3},{"language":"de","tag":"Leitfäden","count":3},{"language":"de","tag":"Erste Schritte","count":3},{"language":"es","tag":"Guías","count":3},{"language":"es","tag":"Primeros pasos","count":3},{"language":"fr","tag":"Guides","count":3},{"language":"fr","tag":"Démarrage","count":3},{"language":"it","tag":"Guide","count":3},{"language":"it","tag":"Per iniziare","count":3},{"language":"ja","tag":"ガイド","count":3},{"language":"ja","tag":"はじめに","count":3},{"language":"pt","tag":"Guias","count":3},{"language":"pt","tag":"Começando","count":3},{"language":"en","tag":"Tech Stack","count":2},{"language":"de","tag":"Tech Stack","count":2},{"language":"es","tag":"Novedades","count":2},{"language":"es","tag":"Tech Stack","count":2},{"language":"fr","tag":"Tech Stack","count":2},{"language":"it","tag":"Tech Stack","count":2},{"language":"ja","tag":"テックスタック","count":2},{"language":"pt","tag":"Novidades","count":2},{"language":"pt","tag":"Tech Stack","count":2},{"language":"en","tag":"Changelog","count":1},{"language":"en","tag":"What's New","count":1},{"language":"de","tag":"Changelog","count":1},{"language":"de","tag":"Was ist neu","count":1},{"language":"fr","tag":"Changelog","count":1},{"language":"fr","tag":"Nouveautés","count":1},{"language":"it","tag":"Changelog","count":1},{"language":"it","tag":"Novità","count":1},{"language":"ja","tag":"変更履歴","count":1},{"language":"ja","tag":"新着情報","count":1}]},"assistantConfig":{},"basePath":"","hasChatPermissions":false,"hasWebMcpPermissions":false,"toggles":[{"name":"kill-isr","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-rbac-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-mintlify-slack","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"agent-integrations-settings","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"rbac-expansion","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-pr-grouping","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"custom-prefix","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"analytics-v7","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"user-flows-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"no-publish-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-onboarding","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving-live","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"stripTemperatureMiddleware","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"support-platform-pylon-zendesk","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"snapshot-serving","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"instant-rollback","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications-server","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"granular-notifications","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automations-fable","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fixed-ai-action-pricing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"site-roles","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"automation-resolve-merge-conflict","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"scoped-publishing","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"mintql","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"page-level-analytics","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-version-history-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"billing-page-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"full-page-search","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workspace-projects","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"assistant-v5","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"fork-pr-previews","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"revalidation-jwt","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-sso-scim","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"hobby-abuse-scan","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"dashboard-inbox","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-signup","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-dual-write","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"workos-enabled","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"approve-review-flow","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"editor-metadata","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"sso-setup-deadline-banner","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"turbopuffer-serve","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"live-agents","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"starter-pricing","enabled":true,"variant":{"name":"treatment","enabled":true,"payload":{"type":"string","value":"treatment"},"feature_enabled":true},"impressionData":false},{"name":"llms-txt-v2","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false},{"name":"wildcard-email-auth","enabled":true,"variant":{"name":"disabled","enabled":false,"feature_enabled":true},"impressionData":false}],"googleFontsInlined":false},"customCss":[]}
{"page":{"pagePath":"guides/3pl-warehouse-holds","slug":"/guides/3pl-warehouse-holds","pageMetadata":{"title":"Stop your 3PL from picking Shopify orders before edits finish","sidebarTitle":"3PL and warehouse holds","description":"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.","href":"/guides/3pl-warehouse-holds"},"description":{"compiledSource":"\"use strict\";\nconst {jsx: _jsx} = arguments[0];\nconst {useMDXComponents: _provideComponents} = arguments[0];\nfunction _createMdxContent(props) {\n const _components = {\n p: \"p\",\n ..._provideComponents(),\n ...props.components\n };\n return _jsx(_components.p, {\n children: \"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\"\n });\n}\nfunction MDXContent(props = {}) {\n const {wrapper: MDXLayout} = {\n ..._provideComponents(),\n ...props.components\n };\n return MDXLayout ? _jsx(MDXLayout, {\n ...props,\n children: _jsx(_createMdxContent, {\n ...props\n })\n }) : _createMdxContent(props);\n}\nreturn {\n default: MDXContent\n};\n","frontmatter":{},"scope":{}},"pageType":"default","mdx":{"mdxSource":{"compiledSource":"\"use strict\";const{Fragment:_Fragment,jsx:_jsx,jsxs:_jsxs}=arguments[0];const{useMDXComponents:_provideComponents}=arguments[0];function _createMdxContent(props){const _components={a:`a`,code:`code`,li:`li`,ol:`ol`,p:`p`,strong:`strong`,tbody:`tbody`,td:`td`,th:`th`,thead:`thead`,tr:`tr`,ul:`ul`,..._provideComponents(),...props.components},{Accordion,AccordionGroup,Heading,Info,Note,Step,Steps,Tab,Table,Tabs,Tip,Warning}=_components;if(!Accordion)_missingMdxReference(`Accordion`,true);if(!AccordionGroup)_missingMdxReference(`AccordionGroup`,true);if(!Heading)_missingMdxReference(`Heading`,true);if(!Info)_missingMdxReference(`Info`,true);if(!Note)_missingMdxReference(`Note`,true);if(!Step)_missingMdxReference(`Step`,true);if(!Steps)_missingMdxReference(`Steps`,true);if(!Tab)_missingMdxReference(`Tab`,true);if(!Table)_missingMdxReference(`Table`,true);if(!Tabs)_missingMdxReference(`Tabs`,true);if(!Tip)_missingMdxReference(`Tip`,true);if(!Warning)_missingMdxReference(`Warning`,true);return _jsxs(_Fragment,{children:[_jsx(_components.p,{children:`Revize is a Shopify app for post-checkout order editing. This guide is for stores that ship through a 3PL, a warehouse management system (WMS) or an ERP, and need the warehouse to pick only the final version of each order.`}),`\n`,_jsx(Info,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Short answer:`}),` keep the order away from your warehouse until editing ends. Revize does this in one of three ways: a Shopify fulfillment hold (`,_jsx(_components.strong,{children:`Hold orders`}),`), a release tag your 3PL waits for (`,_jsx(_components.strong,{children:`Add release tag`}),`), or manual payment capture so the order stays unpaid until editing closes (`,_jsx(_components.strong,{children:`Capture payment when editing closes`}),`). Then let your warehouse close editing early with a stop tag when picking starts.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`why-3pls-pick-edited-orders-too-early`,children:`Why 3PLs pick edited orders too early`}),`\n`,_jsx(_components.p,{children:`Most 3PL and WMS connectors import a Shopify order within minutes of checkout. If a customer changes the size, address or items after the import, the warehouse still has the old version. The fix is timing: the warehouse should only see the order once the customer can no longer change it.`}),`\n`,_jsx(_components.p,{children:`Revize controls that timing with three settings that work together:`}),`\n`,_jsxs(_components.ol,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`When editing ends`}),`: the `,_jsx(_components.a,{href:`/setup/edit-window`,children:`edit deadline`}),` or a per-order `,_jsx(_components.a,{href:`/setup/rules-engine`,children:`rule`}),`.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`What blocks the warehouse until then`}),`: a hold, a release tag, or unpaid status.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`How the warehouse can end editing early`}),`: a stop tag or a Shopify Flow action.`]}),`\n`]}),`\n`,_jsx(Heading,{level:`2`,id:`step-1-choose-when-editing-ends`,children:`Step 1: choose when editing ends`}),`\n`,_jsxs(_components.p,{children:[`In the Revize app, open `,_jsx(_components.strong,{children:`Order Editing → Editing policy → Edit deadline`}),`.`]}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Edit deadline`}),_jsx(_components.th,{children:`Best for warehouses that…`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`A fixed window (15, 30 or 60 minutes) or a custom duration`}),_jsx(_components.td,{children:`pick continuously and need a short, predictable delay`})]}),_jsxs(_components.tr,{children:[_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Scheduled cutoff`}),` (Pro)`]}),_jsx(_components.td,{children:`pick in waves at set times, so every wave starts with a stable list`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:_jsx(_components.strong,{children:`Until fulfillment`})}),_jsx(_components.td,{children:`can absorb changes during picking, or close editing themselves with a stop tag`})]})]})]}),`\n`,_jsx(Warning,{children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Until fulfillment does not hold the order.`}),` With this deadline, Revize doesn’t place a fulfillment hold and doesn’t add a release tag, so your 3PL can import the order straight away. If you need a hold while the order stays editable, use a rule with the `,_jsx(_components.strong,{children:`Hold fulfillment`}),` action instead (rules engine, Pro), or close editing with a stop tag when picking starts.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`step-2-choose-how-the-warehouse-waits`,children:`Step 2: choose how the warehouse waits`}),`\n`,_jsxs(_components.p,{children:[`Open `,_jsx(_components.strong,{children:`Order Editing → Editing policy → Fulfillment while editing`}),`.`]}),`\n`,_jsxs(Tabs,{children:[_jsxs(Tab,{title:`Hold orders (recommended)`,id:`hold-orders-recommended`,children:[_jsx(_components.p,{children:`Revize places a Shopify fulfillment hold when the order is created and lifts it when editing closes. Any 3PL or WMS that respects Shopify fulfillment holds waits automatically.`}),_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`Works with most connectors and needs no setup on the 3PL side.`}),`\n`,_jsx(_components.li,{children:`When the hold lifts, the warehouse gets the final, edited order.`}),`\n`]})]}),_jsxs(Tab,{title:`Skip hold + release tag`,id:`skip-hold-%2B-release-tag`,children:[_jsxs(_components.p,{children:[`Orders are not held. Turn on `,_jsx(_components.strong,{children:`Add release tag`}),` and Revize tags the order `,_jsx(_components.code,{children:`revize:order_released`}),` when editing closes. Set your 3PL to import only orders with that tag.`]}),_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[`Use `,_jsx(_components.strong,{children:`Custom release tag (optional)`}),` if your 3PL already waits for a tag such as `,_jsx(_components.code,{children:`ready_to_ship`}),`. It can’t start with `,_jsx(_components.code,{children:`revize:`}),`.`]}),`\n`,_jsx(_components.li,{children:`Without a release tag, a 3PL can pick orders before customers finish editing. Skip hold is only safe when your 3PL filters by tag.`}),`\n`]})]}),_jsxs(Tab,{title:`Manual payment capture`,id:`manual-payment-capture`,children:[_jsxs(_components.p,{children:[`For connectors that ignore holds but only import `,_jsx(_components.strong,{children:`Paid`}),` orders (Mintsoft’s default, for example). Set payment capture to `,_jsx(_components.strong,{children:`Manual`}),` in Shopify, then turn on `,_jsx(_components.strong,{children:`Capture payment when editing closes`}),`. Payment stays authorized while the customer can edit, and Revize captures it once editing ends, so the order becomes `,_jsx(_components.strong,{children:`Paid`}),` and your connector imports it.`]}),_jsxs(_components.ul,{children:[`\n`,_jsx(_components.li,{children:`Available on every plan.`}),`\n`,_jsxs(_components.li,{children:[`Revize won’t capture an order while it carries one of your `,_jsx(_components.strong,{children:`Don’t capture orders with these tags`}),` tags.`]}),`\n`,_jsxs(_components.li,{children:[`If a capture fails, `,_jsx(_components.strong,{children:`Try again if a capture fails`}),` retries and Revize emails you when it gives up.`]}),`\n`,_jsx(_components.li,{children:`If you also hold orders or use a release tag, the order is released only once it’s paid.`}),`\n`]})]})]}),`\n`,_jsx(Note,{children:_jsxs(_components.p,{children:[`Revize never releases an order while the customer still owes money for an edit. If a customer adds items and doesn’t pay, the order stays held until it’s paid, or until `,_jsx(_components.a,{href:`/setup/reverse-unpaid-edits`,children:`Reverse unpaid edits`}),` (Pro) rolls the unpaid change back.`]})}),`\n`,_jsx(Heading,{level:`3`,id:`hold-only-some-orders`,children:`Hold only some orders`}),`\n`,_jsxs(_components.p,{children:[`On Pro, the `,_jsx(_components.a,{href:`/setup/rules-engine`,children:`rules engine`}),` can hold fulfillment per order. Add a rule, match the orders (for example order tag `,_jsx(_components.code,{children:`pre-order`}),`, a shipping method, or a destination), and turn on the `,_jsx(_components.strong,{children:`Hold fulfillment`}),` action. The hold is released when that rule’s deadline passes. Hold fulfillment can’t be combined with `,_jsx(_components.strong,{children:`Disable editing`}),` or with the `,_jsx(_components.strong,{children:`Until fulfilled`}),` deadline.`]}),`\n`,_jsxs(_components.p,{children:[`To keep orders that Shopify flags as risky on hold for review, turn on `,_jsx(_components.strong,{children:`Keep risky orders on hold`}),` under `,_jsx(_components.strong,{children:`Fulfillment while editing`}),`.`]}),`\n`,_jsx(Heading,{level:`2`,id:`step-3-let-the-warehouse-close-editing-early`,children:`Step 3: let the warehouse close editing early`}),`\n`,_jsx(_components.p,{children:`Picking often starts before the edit window ends. Close editing the moment that happens:`}),`\n`,_jsxs(Steps,{children:[_jsx(Step,{title:`Have the WMS or Shopify Flow tag the order`,children:_jsxs(_components.p,{children:[`When an order enters picking, add a tag such as `,_jsx(_components.code,{children:`picked`}),` or `,_jsx(_components.code,{children:`wms:processing`}),`. Most WMS connectors can write a tag back to Shopify; Shopify Flow can too.`]})}),_jsx(Step,{title:`Add the same tag in Revize`,children:_jsxs(_components.p,{children:[`In Revize, go to `,_jsx(_components.strong,{children:`Settings → Order editing → Editing restrictions → Order tags`}),` and add the tag. Tag matching ignores letter case, but the spelling must match.`]})}),_jsx(Step,{title:`Editing closes immediately`,children:_jsxs(_components.p,{children:[`As soon as the tag lands, the customer can’t edit the order any more, even if the edit window hasn’t run out. See `,_jsx(_components.a,{href:`/setup/order-edit-restrictions`,children:`Order edit restrictions`}),`.`]})})]}),`\n`,_jsxs(_components.p,{children:[`If your workflow already runs in Shopify Flow, the Revize action `,_jsx(_components.strong,{children:`Close editing now`}),` does the same thing without a tag. See `,_jsx(_components.a,{href:`/guides/shopify-flow`,children:`Shopify Flow`}),`.`]}),`\n`,_jsx(Heading,{level:`2`,id:`match-the-release-to-your-pick-schedule`,children:`Match the release to your pick schedule`}),`\n`,_jsxs(Table,{children:[_jsx(_components.thead,{children:_jsxs(_components.tr,{children:[_jsx(_components.th,{children:`Setup`}),_jsx(_components.th,{children:`What the warehouse sees`})]})}),_jsxs(_components.tbody,{children:[_jsxs(_components.tr,{children:[_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Hold orders`}),` + fixed window`]}),_jsx(_components.td,{children:`The hold lifts when the window ends. The most common setup.`})]}),_jsxs(_components.tr,{children:[_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Hold orders`}),` + `,_jsx(_components.strong,{children:`Scheduled cutoff`})]}),_jsx(_components.td,{children:`Orders release at your cutoff times, so each pick wave starts with final orders.`})]}),_jsxs(_components.tr,{children:[_jsxs(_components.td,{children:[_jsx(_components.strong,{children:`Skip hold`}),` + `,_jsx(_components.strong,{children:`Add release tag`})]}),_jsx(_components.td,{children:`Orders flow normally; the 3PL imports only tagged orders.`})]}),_jsxs(_components.tr,{children:[_jsx(_components.td,{children:`Any setup + stop tag`}),_jsx(_components.td,{children:`Editing also closes the moment picking starts.`})]})]})]}),`\n`,_jsxs(_components.p,{children:[`Some connectors also have their own delay, such as ShipStation’s minimum order age or Mintsoft’s import delay. Setting that delay to your edit window length is a simple backup. See the `,_jsx(_components.a,{href:`/support/faq-advanced#third-party-fulfillment-integrations`,children:`ShipStation and Mintsoft answers`}),`.`]}),`\n`,_jsx(Heading,{level:`2`,id:`if-the-3pl-already-picked-the-order`,children:`If the 3PL already picked the order`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Once an order is fulfilled in Shopify, editing ends`}),` and the customer no longer sees the edit options.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`Once Revize has released an order to fulfillment, it stays closed.`}),` The Shopify Flow action `,_jsx(_components.strong,{children:`Reopen editing`}),` skips orders that were already released, fulfilled or partially fulfilled, so a late workflow can’t reopen an order the warehouse is working on.`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.strong,{children:`If a change reached the warehouse after it imported the order`}),` (for example on Skip hold without a release tag), your 3PL still has the old version. Re-sync or update the order in the 3PL, and switch to `,_jsx(_components.strong,{children:`Hold orders`}),`, a release tag or a stop tag so it doesn’t happen again.`]}),`\n`]}),`\n`,_jsx(Heading,{level:`2`,id:`rollout-checklist`,children:`Rollout checklist`}),`\n`,_jsxs(Steps,{children:[_jsx(Step,{title:`Check what your connector respects`,children:_jsxs(_components.p,{children:[`Ask your 3PL or check its Shopify connector: does it wait for Shopify fulfillment holds, filter by tag, or import only paid orders? That decides between `,_jsx(_components.strong,{children:`Hold orders`}),`, a release tag and payment capture.`]})}),_jsx(Step,{title:`Set the edit deadline`,children:_jsxs(_components.p,{children:[`Match it to how soon picking starts. Use `,_jsx(_components.strong,{children:`Scheduled cutoff`}),` for wave picking.`]})}),_jsx(Step,{title:`Choose Fulfillment while editing`,children:_jsxs(_components.p,{children:[_jsx(_components.strong,{children:`Hold orders`}),`, or `,_jsx(_components.strong,{children:`Skip hold`}),` with `,_jsx(_components.strong,{children:`Add release tag`}),`, and `,_jsx(_components.strong,{children:`Capture payment when editing closes`}),` if your connector imports only paid orders.`]})}),_jsx(Step,{title:`Add a stop tag`,children:_jsxs(_components.p,{children:[`Have the WMS or Flow tag orders when picking starts, and add that tag under `,_jsx(_components.strong,{children:`Editing restrictions → Order tags`}),`.`]})}),_jsx(Step,{title:`Test before customers see it`,children:_jsxs(_components.p,{children:[`Turn on `,_jsx(_components.a,{href:`/how-to-test-revize`,children:`Test mode`}),`, place a test order as a tagged test customer, edit it, and confirm the warehouse imports the edited version only after editing closes.`]})})]}),`\n`,_jsx(Tip,{children:_jsxs(_components.p,{children:[`Not sure which method fits your 3PL? Revize works with 100+ 3PLs, WMS and ERPs, and the team configures the setup with you. See `,_jsx(_components.a,{href:`/integrations/index`,children:`Tech stack`}),` or `,_jsx(_components.a,{href:`https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true`,children:`book a setup call`}),`.`]})}),`\n`,_jsx(Heading,{level:`2`,id:`frequently-asked-questions`,children:`Frequently asked questions`}),`\n`,_jsxs(AccordionGroup,{children:[_jsx(Accordion,{title:`Does Revize work with my 3PL if it ignores Shopify holds?`,icon:`truck`,id:`does-revize-work-with-my-3pl-if-it-ignores-shopify-holds`,children:_jsxs(_components.p,{children:[`Yes. Use `,_jsx(_components.strong,{children:`Skip hold`}),` with a release tag if your 3PL can filter by tag, or manual payment capture with `,_jsx(_components.strong,{children:`Capture payment when editing closes`}),` if it imports only paid orders.`]})}),_jsx(Accordion,{title:`Does Until fulfillment hold my orders?`,icon:`pause`,id:`does-until-fulfillment-hold-my-orders`,children:_jsxs(_components.p,{children:[`No. Until fulfillment keeps editing open until the order is fulfilled and doesn’t hold it or add a release tag. Use a rule with `,_jsx(_components.strong,{children:`Hold fulfillment`}),` (Pro) or a stop tag if your warehouse must wait.`]})}),_jsx(Accordion,{title:`What tag does Revize add when editing closes?`,icon:`tag`,id:`what-tag-does-revize-add-when-editing-closes`,children:_jsxs(_components.p,{children:[_jsx(_components.code,{children:`revize:order_released`}),`, when `,_jsx(_components.strong,{children:`Add release tag`}),` is on. You can replace it with your own tag in `,_jsx(_components.strong,{children:`Custom release tag (optional)`}),`.`]})}),_jsx(Accordion,{title:`Can my WMS stop customers editing once picking starts?`,icon:`hand`,id:`can-my-wms-stop-customers-editing-once-picking-starts`,children:_jsxs(_components.p,{children:[`Yes. Have it add a tag when picking starts and add that tag under `,_jsx(_components.strong,{children:`Settings → Order editing → Editing restrictions → Order tags`}),`. Editing closes immediately.`]})}),_jsx(Accordion,{title:`Will an unpaid edit ship?`,icon:`credit-card`,id:`will-an-unpaid-edit-ship`,children:_jsx(_components.p,{children:`No. Revize doesn’t release an order while the customer still owes money for an edit.`})})]}),`\n`,_jsx(Heading,{level:`2`,id:`related-setup`,children:`Related setup`}),`\n`,_jsxs(_components.ul,{children:[`\n`,_jsxs(_components.li,{children:[_jsx(_components.a,{href:`/setup/edit-window`,children:`Edit window`}),`: all deadline options`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.a,{href:`/setup/order-processing`,children:`Order processing`}),`: Hold orders, Skip hold and release tags`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.a,{href:`/setup/fulfillment-sync`,children:`Fulfillment sync`}),`: release timing and tags`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.a,{href:`/setup/rules-engine`,children:`Rules engine`}),`: per-order deadlines and Hold fulfillment`]}),`\n`,_jsxs(_components.li,{children:[_jsx(_components.a,{href:`/setup/order-edit-restrictions`,children:`Order edit restrictions`}),`: stop tags`]}),`\n`]})]})}function MDXContent(props={}){const{wrapper:MDXLayout}={..._provideComponents(),...props.components};return MDXLayout?_jsx(MDXLayout,{...props,children:_jsx(_createMdxContent,{...props})}):_createMdxContent(props)}return{default:MDXContent};function _missingMdxReference(id,component){throw new Error(`Expected `+(component?`component`:`object`)+\" `\"+id+\"` to be defined: you likely forgot to import, pass, or provide it.\")}","frontmatter":{},"scope":{"config":{},"pageMetadata":{"title":"Stop your 3PL from picking Shopify orders before edits finish","sidebarTitle":"3PL and warehouse holds","description":"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.","href":"/guides/3pl-warehouse-holds"}}},"mdxSourceWithNoJs":null},"mdxExtracts":{"tableOfContents":[{"title":"Why 3PLs pick edited orders too early","slug":"why-3pls-pick-edited-orders-too-early","depth":2,"children":[]},{"title":"Step 1: choose when editing ends","slug":"step-1-choose-when-editing-ends","depth":2,"children":[]},{"title":"Step 2: choose how the warehouse waits","slug":"step-2-choose-how-the-warehouse-waits","depth":2,"children":[{"title":"Hold only some orders","slug":"hold-only-some-orders","depth":3,"children":[]}]},{"title":"Step 3: let the warehouse close editing early","slug":"step-3-let-the-warehouse-close-editing-early","depth":2,"children":[]},{"title":"Match the release to your pick schedule","slug":"match-the-release-to-your-pick-schedule","depth":2,"children":[]},{"title":"If the 3PL already picked the order","slug":"if-the-3pl-already-picked-the-order","depth":2,"children":[]},{"title":"Rollout checklist","slug":"rollout-checklist","depth":2,"children":[]},{"title":"Frequently asked questions","slug":"frequently-asked-questions","depth":2,"children":[]},{"title":"Related setup","slug":"related-setup","depth":2,"children":[]}],"codeExamples":{}},"jsLinks":[],"subdomain":"revize","siteName":"Revize Documentation","title":"Stop your 3PL from picking Shopify orders before edits finish - Revize Documentation","navMaps":{"firstHrefInVersion":{},"firstHrefInLanguage":{"en":{"href":"/guides/3pl-warehouse-holds","matchLevel":0},"es":{"href":"/es/guides/3pl-warehouse-holds","matchLevel":1},"fr":{"href":"/fr/guides/3pl-warehouse-holds","matchLevel":1},"de":{"href":"/de/guides/3pl-warehouse-holds","matchLevel":1},"pt":{"href":"/pt/guides/3pl-warehouse-holds","matchLevel":1},"it":{"href":"/it/guides/3pl-warehouse-holds","matchLevel":1},"ja":{"href":"/ja/guides/3pl-warehouse-holds","matchLevel":1}}},"lastModified":"2026-11-22T09:23:38.939Z","gitLastModified":"2026-11-22T09:07:48.000Z","originalFileLocation":"guides/3pl-warehouse-holds.mdx","locale":"en"},"headHtml":"\u003cscript data-mint-head>(function(){var d=document.documentElement,p=null;if(!p){try{p=localStorage.getItem(\"isDarkMode\")}catch(e){}if(p==='true')p='dark';else if(p==='false')p='light';if(p!=='light'\u0026\u0026p!=='dark'\u0026\u0026p!=='system')p=\"system\"}var r=p==='system'?(matchMedia(\"(prefers-color-scheme: dark)\").matches?'dark':'light'):p;d.classList.remove(r==='dark'?'light':'dark');d.classList.add(r);d.setAttribute(\"data-theme-preference\",p)})();\u003c/script>\u003cmeta data-mint-head name=\"description\" content=\"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\">\u003cmeta data-mint-head name=\"application-name\" content=\"Revize Documentation\">\u003cmeta data-mint-head name=\"generator\" content=\"Mintlify\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/android-chrome-192x192.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"apple-touch-icon\" type=\"image/png\" sizes=\"180x180\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/apple-touch-icon.png\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/favicon-16x16.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/favicon-32x32.png\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/favicon.ico\" media=\"(prefers-color-scheme: light)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"192x192\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon-dark/android-chrome-192x192.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"16x16\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon-dark/favicon-16x16.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"icon\" type=\"image/png\" sizes=\"32x32\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon-dark/favicon-32x32.png\" media=\"(prefers-color-scheme: dark)\">\u003clink data-mint-head rel=\"shortcut icon\" type=\"image/x-icon\" href=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon-dark/favicon.ico\" media=\"(prefers-color-scheme: dark)\">\u003cmeta data-mint-head property=\"og:title\" content=\"Stop your 3PL from picking Shopify orders before edits finish - Revize Documentation\">\u003cmeta data-mint-head property=\"og:description\" content=\"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\">\u003cmeta data-mint-head property=\"og:site_name\" content=\"Revize Documentation\">\u003cmeta data-mint-head property=\"og:url\" content=\"https://docs.revize.app/guides/3pl-warehouse-holds\">\u003cmeta data-mint-head property=\"og:type\" content=\"website\">\u003cmeta data-mint-head property=\"og:image\" content=\"https://revize.mintlify.site/_mintlify/api/og/v2?division=Guides\u0026amp;title=Stop+your+3PL+from+picking+Shopify+orders+before+edits+finish\u0026amp;description=How+Revize+keeps+ShipBob%2C+ShipStation%2C+Mintsoft+and+other+3PLs%2C+WMS+and+ERPs+from+pulling+a+Shopify+order+while+the+customer+can+still+edit+it%3A+holds%2C+release+t\u0026amp;theme=c70b9afd18d41f5c63438d60\u0026amp;signature=845b05b247f3d2bd93a9a84bc4a1edbcd7696310adffcc59734dd1d48015643e\">\u003cmeta data-mint-head property=\"og:image:width\" content=\"1200\">\u003cmeta data-mint-head property=\"og:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"twitter:card\" content=\"summary_large_image\">\u003cmeta data-mint-head name=\"twitter:title\" content=\"Stop your 3PL from picking Shopify orders before edits finish - Revize Documentation\">\u003cmeta data-mint-head name=\"twitter:description\" content=\"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\">\u003cmeta data-mint-head name=\"twitter:image\" content=\"https://revize.mintlify.site/_mintlify/api/og/v2?division=Guides\u0026amp;title=Stop+your+3PL+from+picking+Shopify+orders+before+edits+finish\u0026amp;description=How+Revize+keeps+ShipBob%2C+ShipStation%2C+Mintsoft+and+other+3PLs%2C+WMS+and+ERPs+from+pulling+a+Shopify+order+while+the+customer+can+still+edit+it%3A+holds%2C+release+t\u0026amp;theme=c70b9afd18d41f5c63438d60\u0026amp;signature=845b05b247f3d2bd93a9a84bc4a1edbcd7696310adffcc59734dd1d48015643e\">\u003cmeta data-mint-head name=\"twitter:image:width\" content=\"1200\">\u003cmeta data-mint-head name=\"twitter:image:height\" content=\"630\">\u003cmeta data-mint-head name=\"msapplication-config\" content=\"/mintlify-assets/_mintlify/favicons/revize/c4M3rFhgWDKUZr2V/_generated/favicon/browserconfig.xml\">\u003cmeta data-mint-head name=\"apple-mobile-web-app-title\" content=\"Revize Documentation\">\u003cmeta data-mint-head name=\"msapplication-TileColor\" content=\"#6366F1\">\u003cmeta data-mint-head name=\"application-name\" content=\"Revize\">\u003clink data-mint-head rel=\"canonical\" href=\"https://docs.revize.app/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" type=\"application/xml\" href=\"/sitemap.xml\">\u003clink data-mint-head rel=\"alternate\" type=\"text/markdown\" href=\"/guides/3pl-warehouse-holds.md\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"en\" href=\"https://docs.revize.app/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"es\" href=\"https://docs.revize.app/es/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"fr\" href=\"https://docs.revize.app/fr/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"de\" href=\"https://docs.revize.app/de/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"pt\" href=\"https://docs.revize.app/pt/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"it\" href=\"https://docs.revize.app/it/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"ja\" href=\"https://docs.revize.app/ja/guides/3pl-warehouse-holds\">\u003clink data-mint-head rel=\"alternate\" hreflang=\"x-default\" href=\"https://docs.revize.app/guides/3pl-warehouse-holds\">\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@graph\":[{\"@type\":\"Organization\",\"@id\":\"https://revize.app/#organization\",\"name\":\"Revize\",\"legalName\":\"Untechnickle\",\"url\":\"https://revize.app\",\"logo\":{\"@type\":\"ImageObject\",\"url\":\"https://docs.revize.app/logo/revize-logo-dark.png\"},\"sameAs\":[\"https://apps.shopify.com/revize\",\"https://revize.app\",\"https://www.untechnickle.com\"]},{\"@type\":\"WebSite\",\"@id\":\"https://docs.revize.app#website\",\"name\":\"Revize Documentation\",\"url\":\"https://docs.revize.app\",\"publisher\":{\"@id\":\"https://revize.app/#organization\"}},{\"@type\":\"WebPage\",\"@id\":\"https://docs.revize.app/guides/3pl-warehouse-holds#webpage\",\"url\":\"https://docs.revize.app/guides/3pl-warehouse-holds\",\"name\":\"Stop your 3PL from picking Shopify orders before edits finish\",\"description\":\"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\",\"dateModified\":\"2026-11-22T09:07:48.000Z\",\"isPartOf\":{\"@id\":\"https://docs.revize.app#website\"},\"breadcrumb\":{\"@id\":\"https://docs.revize.app/guides/3pl-warehouse-holds#breadcrumb\"}},{\"@type\":\"BreadcrumbList\",\"@id\":\"https://docs.revize.app/guides/3pl-warehouse-holds#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Revize Documentation\",\"item\":\"https://docs.revize.app\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Stop your 3PL from picking Shopify orders before edits finish\",\"item\":\"https://docs.revize.app/guides/3pl-warehouse-holds\"}]},{\"@type\":[\"Article\",\"TechArticle\"],\"@id\":\"https://docs.revize.app/guides/3pl-warehouse-holds#article\",\"headline\":\"Stop your 3PL from picking Shopify orders before edits finish\",\"name\":\"Stop your 3PL from picking Shopify orders before edits finish\",\"description\":\"How Revize keeps ShipBob, ShipStation, Mintsoft and other 3PLs, WMS and ERPs from pulling a Shopify order while the customer can still edit it: holds, release tags, payment capture, stop tags and a rollout checklist.\",\"url\":\"https://docs.revize.app/guides/3pl-warehouse-holds\",\"mainEntityOfPage\":{\"@id\":\"https://docs.revize.app/guides/3pl-warehouse-holds#webpage\"},\"dateModified\":\"2026-11-22T09:07:48.000Z\",\"publisher\":{\"@id\":\"https://revize.app/#organization\"},\"isPartOf\":{\"@id\":\"https://docs.revize.app#website\"}}]}\u003c/script>\u003cscript data-mint-head type=\"application/ld+json\">{\"@context\":\"https://schema.org\",\"@type\":\"WebSite\",\"name\":\"Revize Documentation\",\"publisher\":{\"@type\":\"Organization\",\"name\":\"Revize\"},\"provider\":{\"@type\":\"Organization\",\"name\":\"Mintlify\",\"url\":\"https://mintlify.com\"}}\u003c/script>","agentPointerHref":"/guides/3pl-warehouse-holds.md","siteName":"Revize Documentation","nav":{"global":{"anchors":[{"anchor":"Install Revize","icon":"cart-plus","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"},{"anchor":"Book Demo","icon":"calendar-days","href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true"}]},"languages":[{"language":"en","default":true,"tabs":[{"tab":"Documentation","icon":"book","groups":[{"group":"Getting Started","icon":"rocket","pages":[{"title":"Edit Shopify orders after checkout","sidebarTitle":"Welcome","href":""},{"title":"Set up Shopify order editing in minutes","sidebarTitle":"Quickstart","href":"/quickstart"},{"title":"Test Shopify order edits with a draft order","sidebarTitle":"How to test","description":"Create a draft order in Shopify, make edits from the order status page, and confirm the changes with Pay now, Refund, or Confirm.","href":"/how-to-test-revize"}]},{"group":"Guides","icon":"book-open","pages":[{"title":"Stop your 3PL from picking Shopify orders before edits finish","sidebarTitle":"3PL and warehouse holds","href":"/guides/3pl-warehouse-holds"},{"title":"Set up order editing for Shopify Plus and high-volume stores","sidebarTitle":"Shopify Plus and high volume","description":"A setup guide for Shopify Plus, Advanced and Grow stores and the agencies that run them: edit windows at scale, per-order rules, tag restrictions, Flash sale mode for drops, warehouse holds, upsells, 29 languages and testing before launch.","href":"/guides/shopify-plus-high-volume"},{"title":"Shopify Flow triggers and actions for order editing","sidebarTitle":"Shopify Flow","href":"/guides/shopify-flow"}]},{"group":"Core Setup","icon":"sliders","pages":[{"title":"Set a Shopify order editing window","sidebarTitle":"Edit window","href":"/setup/edit-window"},{"title":"Shopify order editing rules engine","sidebarTitle":"Rules engine","href":"/setup/rules-engine"},{"title":"Hold Shopify orders while customers edit","sidebarTitle":"Order processing","href":"/setup/order-processing"},{"title":"Payments and refunds for Shopify order edits","sidebarTitle":"Payments and refunds","href":"/setup/payments-and-refunds"},{"title":"Shopify post-purchase upsells on the same order","sidebarTitle":"Post-purchase upsells","href":"/setup/post-purchase-upsells"},{"title":"Shopify email upsells: add products to an order from any email","sidebarTitle":"Email upsells","href":"/setup/email-upsells"},{"title":"Reverse unpaid Shopify order edits automatically","sidebarTitle":"Reverse unpaid edits","href":"/setup/reverse-unpaid-edits"},{"title":"Restrict which Shopify orders customers can edit","sidebarTitle":"Edit restrictions","href":"/setup/order-edit-restrictions"},{"title":"Sync edited Shopify orders to your 3PL","sidebarTitle":"Fulfillment sync","href":"/setup/fulfillment-sync"},{"title":"Translate the Shopify order editing portal","sidebarTitle":"Translations","href":"/setup/translations"},{"title":"Edit Shopify subscription and pre-order purchases","sidebarTitle":"Subscriptions \u0026 pre-orders","href":"/setup/subscription-preorders"},{"title":"Advanced Shopify order editing settings","sidebarTitle":"Advanced settings","href":"/setup/advanced-settings"},{"title":"Revize email notifications and sender settings","sidebarTitle":"Notifications","href":"/setup/notifications"},{"title":"Add order editing to Shopify confirmation emails","sidebarTitle":"Confirmation email","href":"/setup/order-confirmation-email"}]},{"group":"Features","icon":"rectangle-list","pages":[{"title":"Shopify self-serve order editing portal","sidebarTitle":"Customer portal","href":"/features/customer-portal"},{"title":"Change a Shopify shipping address after checkout","sidebarTitle":"Address edits","href":"/features/address-edits"},{"title":"Change Shopify size, color, or quantity after checkout","sidebarTitle":"Variant \u0026 quantity","href":"/features/product-quantity-edits"},{"title":"Add products to a Shopify order after checkout","sidebarTitle":"Add products","href":"/features/add-products-upsell"},{"title":"Upgrade Shopify shipping after checkout","sidebarTitle":"Shipping upgrade","href":"/features/shipping-upgrade"},{"title":"Let customers cancel a Shopify order themselves","sidebarTitle":"Cancel order","href":"/features/cancel-order"},{"title":"Shopify order cancellation API","sidebarTitle":"Cancellation API","href":"/features/cancellation-api"},{"title":"Apply a Shopify discount code after checkout","sidebarTitle":"Apply discounts","href":"/features/apply-discounts"},{"title":"Edit a Shopify tax invoice after checkout","sidebarTitle":"Invoices \u0026 tax","href":"/features/invoices-and-tax"},{"title":"Add a preferred delivery date after Shopify checkout","sidebarTitle":"Delivery date","href":"/features/delivery-date"},{"title":"Shopify order support tickets from the portal","sidebarTitle":"Support tickets","href":"/features/support-tickets"},{"title":"Shopify order editing analytics and ROI","sidebarTitle":"Analytics","href":"/features/analytics"},{"title":"Add a custom note when editing a Shopify order","sidebarTitle":"Custom note","href":"/features/custom-note"},{"title":"EU withdrawal requests on the Shopify order status page","sidebarTitle":"EU withdrawal","href":"/features/eu-withdrawal"}]},{"group":"Tech Stack","icon":"puzzle-piece","pages":[{"title":"Revize integrations for Shopify fulfillment and email","sidebarTitle":"Integrations","href":"/integrations/index"},{"title":"Send Klaviyo emails when Shopify orders are edited","sidebarTitle":"Klaviyo","href":"/integrations/klaviyo"}]}]},{"tab":"Support","icon":"life-ring","pages":[{"title":"Support","href":"/support/faq"}]},{"tab":"Changelog","icon":"sparkles","pages":[{"title":"Changelog","href":"/changelog"}]}]},{"language":"es","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Reservar demo"}],"primary":{"type":"button","label":"Instalar Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"es","href":"/es/guides/3pl-warehouse-holds"}]},{"language":"fr","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Réserver une démo"}],"primary":{"type":"button","label":"Installer Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"fr","href":"/fr/guides/3pl-warehouse-holds"}]},{"language":"de","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Demo buchen"}],"primary":{"type":"button","label":"Revize installieren","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"de","href":"/de/guides/3pl-warehouse-holds"}]},{"language":"pt","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Agendar demo"}],"primary":{"type":"button","label":"Instalar Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"pt","href":"/pt/guides/3pl-warehouse-holds"}]},{"language":"it","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"Prenota una demo"}],"primary":{"type":"button","label":"Installa Revize","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"it","href":"/it/guides/3pl-warehouse-holds"}]},{"language":"ja","navbar":{"links":[{"href":"https://cal.com/revize-team-xx92ri/30min?overlayCalendar=true","label":"デモを予約"}],"primary":{"type":"button","label":"Revize をインストール","href":"https://apps.shopify.com/revize?utm_source=documentation\u0026utm_medium=docs\u0026utm_campaign=install_button"}},"pages":[{"title":"ja","href":"/ja/guides/3pl-warehouse-holds"}]}]},"basePath":"","title":"Stop your 3PL from picking Shopify orders before edits finish - Revize Documentation","deploymentId":"dpl_DyXGnKeCjZyA3sUdfMJ7FjkdBefg","buildId":"dpl_DyXGnKeCjZyA3sUdfMJ7FjkdBefg","dynamics":[],"chunks":[]}